Sony DSR-1500, DSR-1500P BVideo/audio input setting section, AAudio input/output level control section

AAudio input/output level control section

aREC/PB LEVEL control knobs

1

REC/PB

LEVEL

2

3

4

VAR

REC

PBPRESET

bVAR switch

aREC/PB LEVEL control knobs

These knobs used to control audio levels function differently depending on the setting of the VAR switch as follows.

VAR switch	Functions of control knobs
setting
PRESET	Control knobs are not effective.
	The analog audio input/output levels are set to
	the reference level set with the LEVEL
	SELECT menu item (see page 66).
REC	Control the analog/digital audio input levels on
	channels 1 to 4 during recording.
PB	Control the analog/digital audio output levels
	on channels 1 to 4 during playback.

bVAR switch

Use to switch the way in which the REC/PB LEVEL control knobs function.

BVideo/audio input setting section

	INPUT SELECT
SDTI/i.LINK	VIDEO	CH1 1/2	CH2 3/4

d CH2 3/4 button

c CH1 1/2 button

bVIDEO button

aSDTI/i.LINK button

aSDTI/i.LINK (SDTI (QSDI) interface/i.LINK selection) button

Each press of this button cycles through the following input signal selection options.

•Digital video signal in SDTI (QSDI) format input to the SDI/SDTI (QSDI) IN connector (optional DSBK-1501 board required)

When this is selected, use the CH1 1/2 button and CH2 3/4 button to select the required input audio signals.

Note

In this case, the phases of the selected audio signals will be about two frames ahead of the phase of the digital video signal in SDTI (QSDI) format.

•Digital video and audio signals in SDTI (QSDI) format input to the SDI/SDTI (QSDI) IN connector (optional DSBK-1501 board required)

•Digital video and audio signals in i.LINK-compatible

DV format input to the i.DV IN/OUT connector (optional DSBK-1503 board required)

The selection made with this button is indicated in the INPUT signal display section (see page 14).

bVIDEO button

Each press of this button cycles through the following input video signal selection options.

•Composite video signal input to the VIDEO IN connector (optional DSBK-1504/1504P board required)

•S-video (separated Y and C) signals input to the VIDEO IN connectors (optional DSBK-1504/1504P board required)

•Y, R− Y and B− Y component video signals input to the VIDEO IN connectors (optional DSBK-1504/1504P board required)

•SDI video signal input to the SDI/SDTI (QSDI) IN connector (optional DSBK-1501 board required)

•Video test signal (selected with the INT VIDEO SG menu item (see page 64)) generated by the internal signal generator

The selection made with this button is indicated by the VIDEO indicators in the INPUT signal display section (see page 13).

Overview 1 Chapter

Location and Function of Parts 11