Recording
This section describes the necessary settings and operations to perform recording on this unit. The same settings and operations apply whether you are using the unit as part of an editing system, for dubbing, or as a
For the necessary connections for recording and the settings not covered in this section, see Chapter 5 “Connections and Settings.”
For dubbing of SDTI (QSDI) format signals, use the AUTO FUNCTION menu item SDTI DUBBING (see page 71). For details, see “Digitally Dubbing Signals in DVCAM Format” on page 51.
Note
When using the unit as a recorder, the optional boards corresponding to the input signal formats to be used are required.
For details about the optional boards, see “Optional Accessories” (page 7).
Settings for Recording
Player
1 2 3 4 PB FS 48k44.1k32k
1 | 2 |
|
Video monitor
INPUT signal display section
LOCAL/REMOTE switch
Recorder
3
dB | dB | INPUT | VIDEO | AUDIO | SERVO | CL REC INHI |
| ||
0 | 0 | V:SDTI |
| ||||||
|
| COMPOSITE | TC | COUNTER | NO EDIT | REPEAT | |||
SDTI | S VIDEO | ANALOG | ANALOG |
|
|
|
| ||
i.LINK | AES/EBU | AES/EBU |
|
|
|
| |||
| SDI SG | SDI SG | SDI SG |
|
|
|
|
7 | 30 | OUTPUT | AUDIO |
|
|
|
| 6 | ||
| VIDEO | HOURS | MINUTES | SECONDS | FRAMES | |||||
SDI | COMPOSITE | CH 1/2 | 4 | |||||||
SDTI | S VIDEO | CH 3/4 | PB FS | REC MODE | VITC | REMOTE | ||||
CH- 1 | 3 CH- 2 4 |
|
| 48K 44.1K 32K | 2CH 4CH | EDIT MODE | 9P i.LINK | |||
|
| REW |
| PLAY |
| F FWD | STOP |
| REC |
5
Audio level meters
When controlling this unit from an editing control unit connected to the REMOTE connector, see “LOCAL/REMOTE switch” on page 9 and the description of the REMOTE I/F menu item on page 67.
Playback and Recording 2 Chapter
Recording 27