To perform the following operations
Operation | Do this: |
Stop playback. | Press the STOP button. |
| The unit enters stop mode, and will automatically |
| switch to standby off mode after the time set with the |
| STOP TIMER menu item (see page 63) for tape |
| protection. |
|
|
Adjust the audio playback | Use the PHONES control knob on the front panel |
level. | (outputs from the PHONES connector on the front |
| panel and the MONITOR connector on the rear panel |
| are adjusted). |
|
|
Play back in shuttle mode | To carry out a |
while monitoring the | speed) in forward or reverse direction, press the G or |
video.a) | g button. |
| To return to |
| button. |
| Note |
|
| When performing these operations, set the LOCAL/ | |
| REMOTE switch on the front panel to LOCAL. | |
|
| |
Play back in jog mode while | To carry out | |
monitoring the video.a) | reverse direction, press the f or F button. | |
| When you hold down the f or F button, playback is | |
| continued in jog mode (− 1/2 times normal speed) in | |
| forward or reverse direction. | |
|
| |
| Note |
|
| When performing these operations, set the LOCAL/ | |
| REMOTE switch on the front panel to LOCAL. | |
|
| |
Inhibit the unit from | Set the CHARA. DISPLAY menu item (see page 60) | |
outputting text information | to OFF. | |
(time data, operation mode |
|
|
indications, etc.) to the |
|
|
video monitor. |
|
|
|
| |
Remove the cassette. | Press the EJECT button. | |
| If a CNT value is shown in the time counter display, | |
| the CNT value is reset. | |
|
| |
Disable the automatic | Set the AUTO REW menu item (see page 60) to | |
rewind function. | DISABLE. | |
|
| |
Change the time period | Change the setting of the STOP TIMER menu item | |
before the unit switches | (see page 63). | |
from stop mode to standby |
|
|
off mode. |
|
|
a) When the SEARCH ENABLE menu item (see page 59) is set to ENABLE.
Playback and Recording 2 Chapter
Playback 35