Overview 1 Chapter
aVIDEO OUT connectors
b AUDIO OUT 1/3 and AUDIO OUT 2/4 connectors
VIDEO OUT | (SUPER) | AUDIO OUT 1/3 | 2/4 |
Y/CPST | MONITOR |
| |
|
|
|
cMONITOR connector
aVIDEO OUT connectors (BNC type)
There are the following VIDEO OUT connectors for outputting analog video signals:
•Y/CPST
•R− Y/C/CPST
•B− Y/CPST (SUPER)
The signals output from these connectors depend on the setting of the VIDEO OUTPUT menu item (see page 67). The setting is indicated by the VIDEO indicators in the OUTPUT signal display section on the front panel.
The analog video signals that can be output from these connectors are as follows.
When COMPOSITE is selected:
Connectors | Output signals |
|
|
Y/CPST | Composite signal |
|
|
R− Y/C/CPST | Composite signal |
|
|
B− Y/CPST | Composite signal |
(SUPER) |
|
|
|
When the CHARA. DISPLAY menu item (see page
60)is set to ON (factory default setting), the B− Y/ CPST (SUPER) connector outputs a composite video signal with superimposed text information.
When
Connectors | Output signals |
|
|
Y/CPST | Y signal |
|
|
R− Y/C/CPST | C signal |
| (3.58 MHz for |
| 4.43 MHz for |
|
|
B− Y/CPST | Composite signal |
(SUPER) |
|
|
|
When Y− R, B is selected:
Connectors | Output signals |
|
|
Y/CPST | Y signal |
|
|
R− Y/C/CPST | R− Y signal |
|
|
B− Y/CPST | B− Y signal |
(SUPER) |
|
|
|
bAUDIO OUT 1/3 and AUDIO OUT 2/4 connectors
These connectors output analog audio signals. The output audio channels are determined by the playback audio mode and the setting (1/2 CH or 3/4 CH) of the AUDIO OUTPUT menu item (see page 67) as follows.
When in 2 CH (48 kHz or 44.1 kHz) mode:
Output | Output audio channels |
connectors |
|
|
|
AUDIO OUT 1/3 | Audio channel 1 (when 1/2 CH is |
| selected) or silent (when 3/4 CH is |
| selected) |
|
|
AUDIO OUT 2/4 | Audio channel 2 (when 1/2 CH is |
| selected) or silent (when 3/4 CH is |
| selected) |
|
|
When in 4 CH (32 kHz) mode:
Output | Output audio channels |
connectors |
|
|
|
AUDIO OUT 1/3 | Audio channel 1 (when 1/2 CH is |
| selected) or audio channel 3 (when 3/ |
| 4 CH is selected) |
|
|
AUDIO OUT 2/4 | Audio channel 2 (when 1/2 CH is |
| selected) or audio channel 4 (when 3/ |
| 4 CH is selected) |
|
|
When the CHARA. DISPLAY menu item (see page
60)is set to ON (factory default setting), the B− Y/ CPST (SUPER) connector outputs a composite video signal with superimposed text information.
The current playback audio mode is indicated by the PB Fs display on the front panel.
cMONITOR connector (RCA phono jack)
This connector outputs audio signals for monitoring. The audio signals to be output from this connector can be selected with the MONITOR SELECT button and METER
20 Location and Function of Parts