2
When the REMOTE indicator is lit, selection of the time data type is carried out at the editing control unit.
5 Select the formats of video and audio input signal to be recorded.
Use the INPUT SELECT buttons in the video/audio input setting section to select the desired signal formats. Each selection is shown by a lit indicator in the INPUT signal display section.
User bit data
U-BIT
Time code
TC
Count value of the time counter
COUNTER
Selected time data
Time data type indicator
Each press of this button cycles through three options: COUNTER (CNT value), TC (time code), and U-BIT (user bit data). The time data type indicator for each option lights as it is selected.
side of the POWER switch.
Power on this unit by pressing on the
3
4 When the REMOTE indicator is off (the external editing control unit is not used), use the COUNTER SELECT button to select the type of time data to be used.
Set up the player to play back a tape.
For details, refer to the operating instructions for the player.
1 Power on the video monitor, then set its input switches according to the signals input from this unit.
Playback and Recording 2 Chapter
Video input signal | Corresponding INPUT | Lit indicator in the |
(input connector) | SELECT button | INPUT signal display |
| | section a) |
Composite signal | VIDEO | COMPOSITE in VIDEO |
(VIDEO IN: Y/CPST) | | group |
| | |
Separated Y/C signal | VIDEO | S VIDEO in VIDEO |
(VIDEO IN: Y/CPST and | | group |
R− Y/C) | | |
| | |
Component signal | VIDEO | Y− R,B in VIDEO group |
(VIDEO IN: Y/CPST, | | |
R− Y/C, and B− Y) | | |
| | |
SDI signal | VIDEO | SDI in VIDEO group |
(SDI/SDTI (QSDI) IN) | | |
| | |
SDTI (QSDI) signal | SDTI/i.LINK | SDTI: both SDTI video |
(SDI/SDTI (QSDI) IN) | | and audio input |
| | signals are |
| | recorded. |
| | V:SDTI: only SDTI video |
| | input signal is |
| | recorded. |
| | |
i.LINK-compatible digital | SDTI/i.LINK | i.LINK |
video signal in DV format | | |
(i.DV IN/OUT) | | |
| | |
Internal test video signal | VIDEO | SG in VIDEO group |
| | |
a)The indicators without the corresponding optional boards (DSBK-1501/1503/1504/1504P) installed in the unit do not light.
28 Recording