Digitally Dubbing Signals in DVCAM Format

In addition to straightforward tape dubbing, you can also use this unit to dub automatically from the beginning of the tape to the end through the SDTI (QSDI) or i.LINK interface.

•To use the SDTI (QSDI) interface, the optional DSBK- 1501 board is required.

•To use the i.LINK interface, the optional DSBK-1503 board is required.

When a tape recorded on a DSR-1/1P Digital Videocassette Recorder or DSR-130/130P Digital Camcorder is dubbed, the ClipLink log data held in the cassette memory is also copied.

Notes

• Use a tape recorded in the DVCAM format. A tape

recorded in DV format cannot be used as a source tape

for dubbing through the SDTI (QSDI) or i.LINK

Use the following procedure.

MENU RESET(NO)

1,9

TC

PRESET SET(YES)

7

2

3,4,5

2,4

1 Press the MENU button in the menu control section.

interface.

• Regardless of the audio recording mode setting of this

unit, dubbing is performed with the original audio

recording mode unchanged (two-channel/48 kHz mode

or four-channel/32 kHz mode).

• Approximately the last 2 minutes of the tape may not be

copied because of differences in tape lengths. (If an

index picture is recorded in this portion, it may also not

be copied.)

• A continuous recorded section of approximately 5

seconds is required before the recording start point. It is

recommended to record beforehand color bars or a

similar signal at the start point of the source tape to be

SYSTEM MENU SETUP MENU

AUTO FUNCTION

HOURS METER

Monitor screen

Setup menu

Time counter display

Editing for Functions Convenient 3 Chapter

dubbed on this unit.

Connections for dubbing via SDTI (QSDI) interface

To carry out dubbing through the SDTI (QSDI) interface, connect the REMOTE and SDTI (QSDI) IN/OUT connectors on this unit to those on the DSR-85/85P/80/ 80P/60/60P/70/70P/2000/2000P/1800/1800P/1600/ 1600P/1500/1500P.

For details of the connections and switch settings, see “Connections for SDTI (QSDI) Dubbing” on page 89.

Connections for dubbing via i.LINK interface

To carry out dubbing through the i.LINK interface, connect the i.DV IN/OUT connectors on this unit and the player.

2 Press the f or F button to select “AUTO FUNCTION.”

SYSTEM MENU

 

Auto func

SETUP MENU

 

AUTO FUNCTION

 

Time counter display

HOURS METER

 

 

 

 

 

 

Monitor screen

Operation

Digitally Dubbing Signals in DVCAM Format 51