gWARNING indicator

This indicator lights up or flashes when there is a fault in the VTR.

For details, see “8-3 Operation Warnings” on page 126.

hDisplay panel

This displays VTR-related warnings, battery status, tape status, audio levels, time data, and so on.

For details, see “2-8 Warnings and Indications on the Display Panel” on page 29.

iREAR TALLY indicator

When the BACK TALLY switch is set to ON, this indicator has the same function as the TALLY indicator.

2-8 Warnings and Indications on the Display Panel

Tape status, battery status and audio level

Audio channel level meter:

When the CH-1/2 / CH-3/4 switch is set to CH-1/2, the audio channel level 1 is displayed.

When the CH-1/2 / CH-3/4 switch is set to CH-3/4, the audio channel level 3 is displayed.

Audio channel level meter: When the CH-1/2 /CH-3/4 switch is set to CH-1/2, the audio channel level 2 is displayed.

When the CH-1/2 / CH-3/4 switch is set to CH-3/4, the audio channel level 4 is displayed.

Battery status indicator

Fully charged

Nearly dead: “BATT” flashes.

Dead battery (battery must be charged): “BATT” and “E” flash.

Tape status indicator

Full (at beginning)

Close to end: “TAPE” flashes.

End (tape must be replaced): “TAPE” and “E” flash.

Tape status, battery status, and level indicators

Controls and Parts of Functions and Locations 2 Chapter

Warnings and Indications on the Display Panel

29