Data Setting User Loading and Saving 6 Chapter

3 Turn the MENU knob to move the b mark to “SCENE STORE,” and press the MENU knob.

F04

SCENE FILE

TOP

s1

:STANDARD

 

s2

:STANDARD

 

s3

:STANDARD

 

s4

:STANDARD

 

s5

:STANDARD

 

sSTANDARD

 

 

SCENE

RECALL

:

EXEC

SCENE

STORE

:

EXEC

F.ID:

 

 

 

The SCENE STORE page appears.

?P00 SCENE STORE

 

ESC

DISPLAY MODE

:

ALL

MEM-01:STANDARD

 

 

MEM-02:STANDARD

 

 

MEM-03:STANDARD

 

 

MEM-04:STANDARD

 

 

MEM-05:STANDARD

 

 

4 Select the desired file number.

When no “Memory Stick” has been inserted

Turn the MENU knob to move the b mark to the desired file number, and press the MENU knob. When the save is completed, the SCENE FILE page appears again.

When you select a file number where data has already been saved

The message “OVERWRITE OK? YES b NO” appears. In this case, the b mark is placed on the left of “NO.”

•To stop overwriting, press the MENU knob.

•To overwrite, move the b mark to “YES” and press the MENU knob.

When a “Memory Stick” has been inserted

You can use up to 20 pages, from P01 to P20, to save scene files in the “Memory Stick.” Each page can hold up to 5 files.

To select a file, proceed as follows:

1Turn the MENU knob until the page which contains the desired file number appears, then press the MENU knob.

P01 SCENE STORE

 

ESC

DISPLAY MODE

:

ALL

001.SCENE1 FEB/05/02 002.STANDARD 003.STANDARD 004.STANDARD 005.STANDARD

***.5FILE SAVE MEM1-5

2Turn the MENU knob to move the b mark to the desired file number, and press the MENU knob. The message “STORE OK? YES b NO” appears.

P01 SCENE STORE

ESC

STORE

OK?

YES

NO

DISPLAY

MODE

:

ALL

001.SCENE1 FEB/05/02 002.STANDARD 003.STANDARD 004.STANDARD 005.STANDARD

***.5FILE SAVE MEM1-5

3To carry out the storing, move the b mark to “YES” and press the MENU knob.

To cancel, press the MENU knob leaving the b mark pointing to “NO.”

You can select the contents of the user file to be displayed on the page.

For details, see “Selecting the display contents” on page 103.

5 To end the menu operation, set the MENU ON/OFF switch to OFF or close the cover of the menu operating section.

To return to the SCENE FILE page

After the message “COMPLETE” is displayed, move the b mark to “ESC” at the top right of the page by turning the MENU knob, then press the MENU knob.

White balance setting data to be saved in the scene file

The white balance setting data selected when you save the scene file is saved. For example, when the WHITE BAL switch is set to A, the adjusted values in memory A are saved in the scene file, and when the WHITE BAL switch is set to PRST, the preset value is saved.

Saving scene files from the camcorder memory to the “Memory Stick”

You can save five scene files from the camcorder to the “Memory Stick” in a single operation.

Proceed as follows:

1 After displaying the SCENE FILE page (page 101) turn the MENU knob to move the b mark to “SCENE STORE,” then press the MENU knob.

One of the SCENE STORE pages appears.

2 Turn the MENU knob until the desired SCENE STORE page appears, then press the MENU knob.

102 Saving and Loading Scene Files