Settings Detailed and Displays Menu 5 Chapter

5-3-7 Selecting the Lens File

The LENS FILE page of the USER menu allows you to change the lens file according to the lens in use.

Proceed as follows:

1 Set the MENU ON/OFF switch to ON.

The last accessed menu page appears on the viewfinder screen.

2 Turn the MENU knob until the LENS FILE page appears, then press the MENU knob to select the page.

The LENS FILE page shows the lens name and the f- stop (iris setting) of the lens file currently selected.

U15

3 Turn the MENU knob to move the b mark to LENS FILE SELECT, and press the MENU knob.

The b mark changes to a z mark, and the z mark changes to a ? mark.

4 Turn the MENU knob until the lens file No. in use appears, then press the MENU knob.

The z mark returns to a b mark, and the ? mark returns to a z mark.

If you do not want to use a lens file

Select OFF.

5 To end the menu operation, set the MENU ON/OFF switch to OFF or close the cover of the menu operating section.

5-3-8 Selecting the Aspect Ratio

The FORMAT page of the OPERATION menu allows you to select the aspect ratio of the video output signal.

Proceed as follows:

1 Follow the procedure of steps 1 to 3 described in “5-3-4 Specifying an Offset for the Auto White Balance Setting” on page 86 to display the FORMAT page of the OPERATION menu.

19FORMAT

16:9/4:3 SELECT : 16:9

SCAN

MODE

:

I

UC/J

SELECT

:

UC

(“UC/J SELECT” is displayed only for the DVW-970.)

2 Turn the MENU knob to move the b mark to “16:9/4:3 SELECT,” and press MENU knob.

The b mark on the left of the selected item changes to a z mark, and the z mark on the left of the setting changes to a ? mark.

3 Turn the MENU knob to display the desired aspect ratio, and press the MENU knob.

The z mark returns to a b mark, and the ? mark returns to a z mark.

4 To end the menu operation, set the MENU ON/OFF switch to OFF or close the cover of the menu operating section.

To display the aspect ratio of 16:9/4:3 on the viewfinder screen

By setting the “DISP 16:9/4:3 ID” item on the VF DISP 2 page of the USER menu to “ON,” “16:9” or “4:3” appears on the viewfinder screen according to the setting on the FORMAT page.

For details, see “5-2-2 Selecting the Display Items” on page 76.

To display “16:9” in color bars

By setting the “SHOT 16:9 ID” on the SHOT DISP page of the USER menu to ON, you can record a “16:9” mode indicator superimposed on the color bars.

For details, see “5-2-6 Recording Shot Data Superimposed on the Color Bars” on page 79.

90

Adjustments and Settings from Menus