Sony DVW-970/970P manual 100

1 On the USER FILE page, turn the MENU knob to move the b mark to “F. ID.”

F01 USER FILE TOP

USER FILE LOAD : EXEC

USER FILE SAVE : EXEC

F.ID : sssssssssssssssss

USER PRESET : EXEC

2 Press the MENU knob.

A character table appears, allowing you to select characters you want to enter.

F01	USER	FILE		TOP
USER	FILE	LOAD	:	EXEC
USER	FILE	SAVE	:	EXEC
F.ID	:?x

!#$%&'()*+,-./012345678 9:;<=>?@ABCDEFGHIJKLMNOP QRSTUVWXYZ[Y]abcdefghijk

lmnopqrstuvwxyz~
INS DEL RET	ESC END

3 Follow the procedure of steps 4 and 5 described in “5- 2-7 Setting the Shot ID” (page 80) to enter the file ID.

4 When you finish entering the file ID, turn the MENU knob to move the x mark to “END,” then press the MENU knob.

6Chapter	The entered file ID is now displayed.
		F01	USER		FILE		TOP
		USER	FILE		LOAD	:	EXEC
Saving		USER	FILE		SAVE	:	EXEC
		F.ID	:	sssssssssssssssss
Loading and		USER	PRESET			:	EXEC
					File ID set in step 3
User
	step 3 in “6-1-2 Saving USER Menu Data (User File)
Setting
	After setting the file ID, carry out the procedure from
Data	to the “Memory Stick”” (page 98).

The set file ID is saved in the “Memory Stick” with the data.

Selecting the display contents

You can select the contents of the file to be displayed on the USER SAVE page and USER LOAD page.

Proceed as follows:

1 Turn the MENU knob to move the b mark to “DISPLAY MODE,” and press the MENU knob.

2 Turn the MENU knob to move the b mark until the desired type of the display contents (see the following table) appears, then press the MENU knob.

P00 USER LOAD		ESC
DISPLAY MODE	:	F.ID

001.USER1

002.USER2 003.NO FILE 004.USER4 005.USER5

Display type	Description
ALL	File ID (10 characters) and date ((month/
	day/year) for the DVW-970 and (day/
	month/year) for the DVW-970P))
F.ID	File ID (16 characters)
DATE	Saved date (year/month/day/hours/
	minutes/seconds)
MODEL	Information on the model

6-1-3 Loading Saved Data from a “Memory Stick”

Note

The data loaded from the “Memory Stick” overwrites the data saved in the camcorder.

Proceed as follows:

1 Set the MENU ON/OFF switch to ON.

The last accessed menu page appears on the screen.

2 Turn the MENU knob until the USER FILE page appears, then press the MENU knob. Alternatively, select “USER FILE” on the CONTENTS page.

3 Turn the MENU knob to move the b mark to “USER FILE LOAD,” and press the MENU knob.

The P00 USER LOAD page appears.

?P00 USER LOAD		ESC
DISPLAY MODE	:	ALL
001.USER1	JAN/01/04
002.USER2	JAN/15/04
003.NO FILE
004.USER4	FEB/05/04
005.USER5	FEB/20/04

4 Turn the MENU knob until the page which contains the desired file number appears, then press the MENU knob.

100 Saving and Loading User Files