cColor temperature

This indicates the currently selected color temperature.

dUHF wireless microphone reception level

This indicates reception level of the wireless microphone when the UHF wireless microphone is attached, using four

xwhich appear at the right of “W.” When four x are lit, the receiving condition is good.

eDC IN / battery voltage or remaining capacity This shows the battery voltage or remaining capacity of an internal battery pack.

When the power is supplied from an AC adaptor connected to the DC IN connector, “DC IN” appears.

When the DISP BATT REMAIN item is set to “INT” on the VF DISP 2 page of the USER menu, the battery voltage is not indicated. However, when the Anton Bauer intelligent battery system or the BP-GL65/GL95/L60S battery pack is used, the remaining battery capacity is automatically detected and indicated as a percentage even when the DISP BATT REMAIN item is set to “OFF.” The indicated value changes in steps of 10%.

• Until the remaining battery capacity is reduced to 40%, the indications MAX, 90%, 80%...40% are displayed for 3 seconds in the viewfinder each time the remaining battery capacity reduces by 10%.

• When the remaining battery capacity is less than 40%,

the indication is displayed all the time.

• When the remaining battery capacity is less than 10%1), the indication flashes. When the remaining battery capacity is reduced further, the LOW indication flashes.

1)This value can be set to either 10% or 20% on the FUNCTION 2 page of the OPERATION menu.

fEssence mark indication

This appears when an essence mark has been recorded.

g* indicator

This flashes when the color bars are displayed and is recorded together with the color bars.

h16:9 mode recording indicator

This indicates recording in the 16:9 mode. This indicator is recorded together with the color bars.

iSetting change and adjustment progress message display area

For details, see “5-2-3 Display Modes and Setting Change Confirmation/Adjustment Progress Messages” on page 77.

jOperation/error message display area

For details, see “Operation/error messages” on page 127.

kIris setting/auto iris override

This indicates the f-stop (iris setting) of the lens.

Also, the auto iris override is displayed using bars which appear in the upper and lower parts to the left of the F number respectively.

For details, see “Changing the Reference Value for Automatic Iris Adjustment” on page 59.

lRemaining tape

This indicator indicates the remaining tape recording time (in minutes) of the VTR.

Examples of remaining disc recording time indication

Indication

Remaining disc recording time

F – 30

Full to 30 minutes

 

 

 

30

– 25

30 to 25 minutes

 

 

 

25

– 20

25 to 20 minutes

 

 

 

20

– 15

20 to 15 minutes

 

 

 

15

– 10

15 to 10 minutes

 

 

 

10

– 5

10 to 5 minutes

 

 

 

5

– 0

5 to 2 minutes

 

 

 

5

– 0 (flashing)

2 to 0 minute

 

 

 

 

mAudio level

These indicate the level of audio channel 1 and channel 2. The peak indication of the VTR level meter is related as follows to the audio level when an 1-kHz sine wave is input.

Audio channel 1

 

 

1

level indicator

 

 

 

 

 

 

 

 

Audio channel 2

 

2

level indicator

 

VTR level meter indicator

nShutter speed

This indicates the shutter speed or the shutter mode. However, if the SHUTTER selector is set to OFF, nothing is displayed.

1/100 (DVW-970) or 1/60 (DVW-970P), 1/125, 1/250, 1/500, 1/1000, 1/2000: Shutter speed (in seconds) in standard mode

ECS: ECS mode

EVS: EVS mode

1F to 8F, 16F: Number of frames in SLS mode

oGain

This indicates the gain of the video amplifier, as set by the GAIN selector.

pWhite balance memory

This indicates the currently selected white balance automatic adjustment memory.

A:Displayed when the WHITE BAL switch is set to A.

B:Displayed when the WHITE BAL switch is set to B.

Settings Detailed and Displays Menu 5 Chapter

Status Display on the Viewfinder Screen

75