Camcorder the Up Setting 7 Chapter

7-5-4 Connecting Line Input Audio Equipment

Connect the audio output connector of the audio equipment that supplies the line input signal to the AUDIO IN CH1 or CH2 connector.

LINE/MIC/+48 V ON switch:

Set the LINE/MIC/+48 V ON switch for the channel to which the audio out cable is attached to LINE.

Audio equipment

AUDIO IN for

CH-1 or CH-2

AUDIO IN CH-1/CH-2 switches:

When the audio cable is connected to either the AUDIO IN CH1 or CH2 connector with REAR XLR AUTO set to ON on the AUDIO-1 page of the MAINTENANCE menu, the signal input to the AUDIO IN CH1 or CH2 connector is automatically selected as the signal to be recorded. This is true regardless of the AUDIO IN CH-1/CH-2 switch settings. (This is called XLR connection automatic detection function.)

When the XLR connection automatic detection function is set to OFF (factory setting), set the AUDIO IN CH-1 or CH-2 switch corresponding to the channel to which the audio equipment is connected to REAR.

7-6 Tripod Mounting

You can easily mount and dismount the camcorder on a tripod by using the VCT-14 tripod adaptor (not supplied).

1 Attach the tripod adaptor to the tripod.

Tripod adaptor

Camera mount

2 Mount the camcorder on the tripod adaptor.

Slide the camcorder forward along the groove in the adaptor until it clicks.

Removing the camcorder from the tripod adaptor

Lever

Red button

While pressing the red button against the lever, move the lever in the direction indicated by the arrow.

Removing the camcorder from the tripod adapter

116 Tripod Mounting