Saving and Loading User | Chapter 6 |
Setting Data |
6-1 Saving and Loading User Files
The camcorder is equipped with a “Memory Stick” drive, which enables you to save user files, scene files, lens files, reference files and “ALL” files. You can load these files from the “Memory Stick” for immediate recall of a particular setting configuration.
When a menu page is displayed, you can set up the camcorder so that inserting a “Memory Stick” automatically jumps to the appropriate
For details about scene files, see
For details of the function for jumping to the appropriate
“Memory Sticks” usable with this camcorder
With this camcorder, you can use “Memory Sticks” whose capacity does not exceed 128 MB.
For details, see “Memory Stick” in “Specifications” on page 130.
The “Memory Stick” can be inserted to or removed from the camcorder with the power turned on or off.
Inserting the “Memory Stick”
Proceed as follows:
1 Push the MEMORY STICK OPEN button.
The cover of the “Memory Stick” compartment opens.
MEMORY STICK OPEN button
2 Hold the “Memory Stick” with the notch facing downward and the label side facing toward you, and insert the “Memory Stick” into the “Memory Stick” insertion slot until it clicks into place. Then, close the cover.
Label side of “Memory Stick”
Note
If it does not fit into the slot properly or if there is some resistance when you insert it, the “Memory Stick” may be turned around or upside down. Do not force the “Memory Stick” into the slot. Confirm the direction of the notch and arrow on the “Memory Stick” before inserting the “Memory Stick,” and then try inserting it again.
Removing the “Memory Stick”
Press the MEMORY STICK OPEN button to open the cover of the “Memory Stick” compartment.
Push the eject button after confirming that the ACCESS indicator is not lit. The “Memory Stick” pops out.
Data Setting User Loading and Saving 6 Chapter
Saving and Loading User Files | 97 |
|
|