Item

Description

TURBO SW IND

OFF: When you operate the GAIN

 

selector after pressing the TURBO

 

GAIN button once, the video gain is

 

changed according to the GAIN

 

selector operation.

 

ON: When the video gain is boosted

 

to the video gain to the value preset

 

by pressing the TURBO GAIN

 

button once, the video gain is not

 

changed even if you operate the

 

GAIN selector, until you press the

 

TURBO GAIN button once more.

 

 

3 Turn the MENU knob to move the b mark to the item you want to set, and press MENU knob.

The b mark on the left of the selected item changes to a z mark, and the z mark on the left of the setting changes to a ? mark.

4 Turn the MENU knob to change the setting, and press the MENU knob.

The z mark on the left of the selected item returns to a b mark, and the ? mark on the left of the setting returns to a z mark.

Any of –3, 0, 3, 6, 9, 12, 18, 24, 30, 36, 42 or 48 dB can be set for each of the L, M, and H positions, in any sequence.

For TURBO, any of –3, 0, 3, 6, 9, 12, 18, 24, 30, 36, 42 or 48 dB can be selected.

To change the gain corresponding to another switch position, return to step 3.

5 To end the menu operation, set the MENU ON/OFF switch to OFF or close the cover of the menu operating section.

The menu display disappears, and the current status of the camcorder is shown along the top and bottom of the viewfinder screen.

5-3-2 Selecting the Output Signals

When the optional CBK-SD01 extension board is installed, you can select the type of video signals (VBS/ SDI) from the VIDEO OUT SEL connector on the OUTPUT page of the USER menu.

Proceed as follows:

1 Set the MENU ON/OFF switch to ON.

The last accessed menu page appears on the viewfinder screen.

2 Turn the MENU knob until the OUTPUT page appears, then press the MENU knob to select the page.

OUTPUT page

U01OUTPUT

REAR BNC OUT SEL: VBS

Item

Description

REAR BNC OUT

Selects the type of the video signal to

SEL

be output from the VIDEO OUT

 

connector.

 

SDI: Outputs the SDI signal. When SDI

 

is selected, connect the VIDEO OUT

 

connector to the SDI IN connector of

 

the video monitor.

 

VBS: Outputs the analog composite

 

video signal. When VBS is selected,

 

connector the VIDEO OUT connector

 

to the VIDEO IN connector of the

 

video monitor.

 

 

3 Turn the MENU knob to move the b mark to “REAR BNC OUT SEL,” and press the MENU knob.

The b mark on the left of “REAR BNC OUT SEL” changes to a z mark, and the z mark on the left of the setting changes to a ? mark.

4 Turn the MENU knob to change the desired setting, and press the MENU knob.

The z mark returns to a b mark, and the ? mark on the left of the setting returns to a z mark.

5 To end the menu operation, set the MENU ON/OFF switch to OFF or close the cover of the menu operating section.

5-3-3 Setting the Color Temperature Manually

You can adjust the value of the white balance manually by setting the color temperature.

Proceed as follows:

1 Holding down the MENU knob, move the MENU ON/ OFF switch to ON.

The TOP menu appears.

2 Turn the MENU knob to move the b mark to “PAINT,” and press the MENU knob.

Settings Detailed and Displays Menu 5 Chapter

Adjustments and Settings from Menus

85