4 When the CONTENTS page is displayed, turn the MENU knob to move the b mark to ESSENCE MARK then push the MENU knob.
When any page of the MAINTENANCE menu is displayed, turn the MENU knob until the ESSENCE MARK or ESSENCE MARK2 page appears, then push the MENU knob.
ESSENCE MARK page
?M10 | ESSENCE MARK |
| ||
LTC | : | SET | ||
REC | START | MARK | : | OFF |
SHOTMARK | 1 | : | OFF | |
SHOTMARK | 2 | : | OFF | |
SHOT | TIME | DISP | : | MD:HM |
ESSENCE MARK2 page
?M11 ESSENCE MARK2 |
| ||||
OVER | AUDIO | LIMIT: | ON | ||
GAIN | CHG MARK | : | ON | ||
FILTER | CHG | MARK | : | ON | |
SHUTTER | CHG MARK: | ON | |||
WHITE | CHG | MARK | : | ON | |
FLASH | MARK |
| : | ON | |
FLASH | MARK | LEVEL: | 10 | ||
E.MARK | SD | LINE | : | 17 | |
|
|
|
|
|
|
The following items on these pages are for setting the corresponding essence marks:
Mark | Condition |
REC START MARK | To be recorded when recording |
| starts. |
|
|
SHOT MARK 1/2 | To be recorded when the RET |
| button on the lens is manually |
| operated. |
|
|
OVER AUDIO | To be recorded when the audio |
LIMIT | level exceeds 0 dBFS. |
|
|
GAIN CHG MARK | To be recorded when the gain |
| value changes. |
|
|
FILTER CHG | To be recorded when the filter is |
MARK | changed. |
|
|
SHUTTER CHG | To be recorded when the shutter |
MARK | speed changes. |
|
|
WHITE CHG | To be recorded when the white |
MARK | balance changes. |
|
|
FLASH MARK | To be recorded when the |
| luminance suddenly changes, |
| such as when the flash is |
| exposed or the unit is moved |
| indoors from outdoors. |
|
|
You can check whether any of the essence marks that are automatically recorded (OVER AUDIO LIMIT, GAIN CHG MARK, FILTER CHG MARK, SHUTTER CHG MARK, WHITE CHG MARK, FLASH MARK) has been recorded, by setting the display for recorded essence marks ON.
For details on the display setting, see
5 Turn the MENU knob to move the b mark to the item to be set.
M10 | ESSENCE MARK |
| ||
LTC | : | SET | ||
REC | START | MARK | : | OFF |
SHOTMARK | 1 | : | OFF | |
SHOTMARK | 2 | : | OFF | |
SHOT | TIME | DISP | : | MD:HM |
6 Push the MENU knob.
The b mark to the left of the item changes to the z mark, and the zmark to the left of the setting changes to the ? mark.
7 Turn the MENU knob clockwise or counter clockwise until the desired setting appears.
To record the mark on tape, select ON. To not record the mark, select OFF.
Note
Whether or not to record good shot marks (shot mark 1 and shot mark 2) and recording start mark in the system area is determined by the ON/OFF settings of the corresponding items regardless of the LTC UB- MARKER setting on the ESSENCE MARK page.
8 Push the MENU knob.
9 Perform settings for the remaining marks, repeating steps 5 to 8.
10When you set FLASH MARK to ON, select the threshold value (1 to 20) of the luminance level change for recording the mark.
11Set the MENU ON/OFF switch to OFF to end the menu operation.
Settings for recording good shot marks and recording start mark to the
Good shot marks (shot mark 1 and shot mark 2) and recording start mark can also be recorded to the
Follow the procedures below:
Playback and Recording 3 Chapter
Recording 37