Recording Messages (continued)

Note on recording

Noise may be recorded if an object, such as your finger, etc., accidentally rubs or scratches the unit during recording.

To listen to the current recording

Press zREC/STOP or xSTOP to stop recording, then press NPLAY/ STOP.

To review the current recording instantly

Press NPLAY/STOP during recording.

To select the microphone sensitivity

You can select the microphone sensitivity by switching the MIC SENS selector on the rear of the unit.

H (high): To record at meeting or in a quiet and/or spacious place.

L (low): To record for dictation or in a noisy place.

Recording with an external microphone or from other equipment

See page 22.

To monitor the recording

Connect an earphone or headphones (not supplied) to the EAR jack. You can adjust the volume with the VOL control, but the recording level is fixed.

Note

If you turn up the volume excessively or place the earphone near the microphone while monitoring recording, the microphone may pick up the sound from the earphone, causing acoustic feedback (howling sound).

Maximum recording time

You can record for up to 64 minutes in SP (standard play) mode and 150 minutes in LP (long play) mode. If you record messages in a mixture of SP and LP modes, the recordable time varies from 64 to 150 minutes.

The unit is factory-set to SP mode. To change the recording mode, see page 35. You can check the remaining amount of recording time by selecting the remaining recording time display mode. See page 34.

12GB

Page 12
Image 12
Sony ICD-R100PC operating instructions 12GB