Troubleshooting
Should any problem persist after you have made these checks, consult your nearest Sony dealer.
Symptom | Remedy |
|
|
The unit does not | •The batteries have been inserted with incorrect |
operate. | polarity. |
| •The batteries are weak. |
| •The buttons are locked with the HOLD switch. |
| (If you press any button, “HOLD” will flash |
| three times.) |
No sound comes | •The earphone or headphones are plugged in. |
from the speaker. | •The volume is turned down completely. |
“END” is displayed | •The memory is full. Erase some of the |
and you cannot start | messages. See page 18. |
recording. | •99 messages has been recorded in the selected |
| |
| file. Select another file or erase some of the |
| messages. See page 18. |
Noise is heard. | •An object, such as your finger, etc., accidentally |
| rubbed or scratched the unit during recording |
| so that noise was recorded. |
| •The unit was placed near an AC power source, |
| a fluorescent lamp or a mobile phone during |
| recording or playback. |
| •Plug of the connected microphone was dirty |
| when recording. Clean the plug. |
| •Earphone/headphones plug is dirty. Clean the |
| plug. |
Recording level is | •The MIC SENS selector is set to “L”. Set it to |
low. | “H” (see page 12). |
Recording is | •The advanced VOR function (page 20) is |
interrupted. | activated. Set the VOR selector to OFF. |
Recording level is | •This unit is designed to automatically adjust |
unstable (when | the recording level when recording meetings, |
recording music, etc.) | etc., and is not suitable for music recording. |
Playback speed is too•Set the PLAY SPEED selector to “NORMAL.”
fast or too slow. | See page 23. |
