To mark an index during recording
While recording a message, press INDEX at the point you want to divide.
The new message number flashes three times at the point you pressed INDEX. The message will be divided in two messages; however, the messages will be recorded without a break.
Message 1 Message 2 Message 3
An index is added.
Recording continues
1Tip
You can add an index during recording pause (page 11).
To add an index during playback
While playing back a message, press INDEX at the point you want to divide.
The message is divided in two and the new message number flashes three times.
An index mark is added and the following index numbers will increase by one.
1Tip
You can add an index after you have paused playback with XPAUSE (page 16).
To play the message you marked with an index
Press . or > to display the message number as the divided messages each have message numbers.
To play the divided messages continuously
Select “ON” for “CONT” as described in “Playing Back All Messages in a File Continuously” on page 38.
Note
If 99 messages have been recorded in a file, you cannot add an index. In that case, reduce the number of messages to 98 or less by erasing unnecessary messages or by moving some of the messages to another file (see page 27) before adding an index.
Continued
Other Functions
