Symptom | Cause | Remedy |
The cassette recorder is not • The HOLD function is
operating.operating.
• The batteries are not inserted into the RADIO BATT battery holder.
• The battery in the TAPE BATT battery holder is weak (“i” flashes in the display).
•Slide HOLD in the opposite direction of the arrow so that “H” in the display disappears.
•Insert two R6 (size AA) batteries into the RADIO BATT battery holder.
•Replace with a new battery.
Cassette-Corder
Playback and recording of | • œ is pressed while | • Press œ while pressing |
both sides of the cassette is | pressing p to display | p to display “FWD ·”. |
not possible. | “ª REV”. |
|
|
|
|
Recording is not possible. | • The cassette tab of the tape | • If you wish to use the tape |
| is broken off to prevent | for recording again, cover |
| accidental recording of | the opening of the broken |
| your important tape. | tab with adhesive tape. |
|
|
|
The timer recording | • MODE is set to RADIO. | • Set MODE to REC. |
function is not operating |
|
|
when the preset standby |
|
|
time arrives. |
|
|
A | • ST•MONO is set to | • Set ST•MONO to ST. |
is recorded as monaural | MONO. |
|
recording. |
|
|
The sound output is poor | • The tape head is dirty and | • Clean the tape head and |
and drops out. | requires cleaning. | tape path (see page 40). |
Additional Information
Additional Information