Changing the MW channel step for use in foreign countries
The channel step differs depending on the area to match the frequency allocation system of the country. Change the MW channel step as necessary.
North and South American countries:
10 kHz
Japan, Europe, and other countries: |
|
|
|
9 kHz | 1 | 2 | 3 |
| 4 | 5 | 6 |
| 7 | 8 | 9 |
|
| 0 |
|
Radio
DIRECT EXE
Notes
•When you have entered the wrong MW channel step in step 3, press DIRECT to cancel the current entry and enter the correct value.
•“TRY AGAIN!” flashes when the MW channel step entered is invalid (i.e., not 9 or 1 and 0).
Repeat from step 2 again.
•Complete each button operation in steps 2 to 4 within 10 seconds. If the clock display returns, repeat from step 2 again.
1 Turn off the radio.
2 Press DIRECT.
AMkHz
FWD
3 Press the numeric buttons (1, 9 and 0) to enter the desired MW channel step (9 or 1 and 0).
4 Press EXE.
AM | kHz |
| FWD |
The MW channel step flashes for about 3 seconds and then the clock display returns.