Broadcasting |
|
|
|
|
| ||||||
A2 | (German) stereo |
|
| Mono |
|
|
| Stereo |
|
|
|
|
|
|
|
|
| ||||||
|
| (Regular sound) |
| (Stereo sound) |
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A2 | (German) bilingual |
|
|
|
|
| |||||
|
|
|
| Main |
|
| Sub |
|
| ||
|
|
|
|
|
|
|
| ||||
|
|
|
| (Main sound) |
| (Sub sound) |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
System | Receiving area |
|
|
NICAM | Hong Kong, Singapore, New Zealand, Malaysia, |
| Thailand, etc. |
|
|
A2 (German) | Australia, Malaysia, Thailand, etc. |
|
|
Notes
•If the signal is very weak, the sound becomes monaural automatically.
•If the stereo sound is noisy when receiving a NICAM program, select “Mono”. The sound becomes monaural, but the noise is reduced.
•Before receiving a NICAM stereo program in China, please check the NICAM broadcast condition at your area. When receiving a NICAM stereo program, the receiving conditions might vary depending on area. In addition, different strength of the NICAM broadcast signal might affect the receiving quality.
If the sound is distorted or noisy when receiving a monaural program through the 8 (antenna) terminal
Press A/B repeatedly until “Mono” appears on the screen.
To cancel the monaural sound setting, press A/B again until “Auto” appears on the screen.
Mono |
| Auto |
|
Notes
•The “Mono” or “Auto” setting is memorized for each program position.
•You cannot receive a stereo broadcast signal when the TV is in the “Mono” setting. Normally, set the TV to “Auto”.
Advanced Operations 35