zYou can copy CD-TEXT information automatically during CD Synchro-recording

By connecting the CONTROL A1 jack on the deck to a Sony CD player using a monaural mini-plug cord (2-pin) (not supplied), you can copy track names automatically during CD Synchro- recording. As a track is recorded, the track name scrolls in the display.

zYou can also perform synchro-recording with a Sony video CD player

By reprogramming the MD deck’s remote, you can use the procedure below to perform Synchro-recording with a Sony video CD player.

Press number button 2 while pressing down ?/1 on the MD deck’s remote. You can now operate the MD deck and the video CD player with the remote. To control the CD player again, press number button 1 while pressing down ?/1 on the MD deck’s remote.

Notes

•Automatic copying of track names in CD-TEXT information can’t be done if you record over existing tracks on an MD.

•When performing CD Synchro-recording with a CD player with a mode selector, be sure to set the selector to CD1.

•When you record tracks from certain CD or multi-disc players, the entire material may be recorded as a single track.

MDs on Recording

21GB