Outputs
LINE (ANALOG) OUT (VARIABLE)
Jack type: phono
| Rated output: 2 Vrms (at 50 kilohms) |
| Load impedance: Over 10 kilohms |
DIGITAL (OPTICAL) OUT Connector type: square optical | |
| Rated output: |
| Impedance: 660 nm (optical wave |
| length) |
PHONES | Jack type: phono |
| Rated output: 10 mW |
| Load impedance: 32 ohms |
General
Power requirements
Where purchased | Power requirements |
U.S.A. and Canada | 120 V AC, 60 Hz |
|
|
Other countries | 230 V AC, 50/60 Hz |
|
|
Power consumption | 14 W |
Dimensions (approx.) | 150 ⋅ 65 ⋅ 275 mm |
| (6 ⋅ 2 5/8 ⋅ 10 7/8 inches) (w/h/d) |
| incl. projecting parts and controls |
Mass (approx.) | 2.0 kg (4 lb 7 oz) |
Supplied accessories
See page 4.
US and foreign patents licensed from Dolby Laboratories Licensing Corporation.
Design and specifications are subject to change without notice.
Display Messages
The following table explains the various messages that appear in the display. Messages are also displayed by the deck’s
Message | Meaning |
|
|
Auto Cut | The Auto Cut function is on (page 17). |
|
|
Blank Disc | A new (blank) or erased MD has been |
| inserted. |
|
|
Cannot Copy | An attempt was made to make a second |
| copy from a digitally dubbed MD (page |
| 14). |
|
|
Cannot Edit | An attempt was made to edit the MD |
| during Program or Shuffle Play. Or the |
| MD is |
|
|
Disc Full | The MD is full (page 43). |
|
|
Impossible | The deck cannot do the specified |
| operation. |
|
|
Initialize (flashing) | The Setup Menu settings have been lost. |
|
|
Name Full | The naming capacity of the MD has |
| reached its limit (about 1,700 characters). |
|
|
No Disc | There is no MD in the deck. |
|
|
No Name | The track or disc has no name. |
|
|
No Program!! | You tried to start Program Play when no |
| program exists. |
|
|
Premastered | An attempt was made to record on a |
| premastered MD. |
|
|
ProgramFull! | The program contains the maximum |
| number of tracks. You cannot add any |
| more tracks. |
|
|
Smart Space | The Smart Space function is on (page 17). |
|
|
REMOTE | The MD deck is being controlled by an |
| external device connected to the deck.* |
|
|
TEXT PROTECT | The |
| recorded is protected and can’t be copied. |
|
|
TOC Reading | The deck is checking the TOC (Table Of |
| Contents) on the MD. |
|
|
*If “REMOTE” appears under other circumstances, turn off the deck, then turn it on again.
Information Additional