To resume normal play

Press PLAY MODE repeatedly until “PROGRAM” turns off.

zThe program remains even after Program Play ends or is stopped

Press H (or NX on the deck) to play the program again.

Notes

•If you eject the MD or disconnect the AC power cord, the program will be lost.

•The display shows “- - - m - - s” when the total playing time of the program exceeds 199 minutes.

•“ProgramFull!” appears when you program 25th track.

Checking the contents of the program

While the deck is stopped and “PROGRAM” lights up, press DISPLAY repeatedly.

The first several tracks in the program appear in the display. To see the rest of the program, press > repeatedly.

Changing the contents of the program

While the deck is stopped and “PROGRAM” lights up, do steps 1 and 2 of “Programming the tracks” on page 26, followed by one of the procedures below:

To

Do the following:

 

 

Erase a track

Press m/M repeatedly until the

 

number of the unwanted track flashes,

 

then press CLEAR.

 

 

Erase all tracks

Press CLEAR repeatedly until all the track

 

numbers disappear.

 

 

Add a track at the

Press m repeatedly until “0” flashes

beginning of the

before the first track number, then do steps

program

3 to 5 of “Programming the tracks” on

 

page 26.

 

 

Add a track to the

Press M repeatedly until “0” flashes

end of the program

after the last track number, then do steps 3

 

to 5 of “Programming the tracks” on page

 

26.

 

 

Replace a track

Press m/M repeatedly until the

 

number of the track to be changed flashes,

 

then do steps 3 to 5 of “Programming the

 

tracks” on page 26.

 

 

MDs Playing

27GB