zYou can adjust the analog output level
By pressing ANALOG OUT LEVEL
When recording from an MD to other component connected to the LINE (ANALOG) OUT jacks on the deck, be sure to set the output level to 0 dB, an ideal level for analog recording. When you set the output level to 0 dB, “ATT” in the display turns off.
Note
You can’t use the buttons on the remote or the deck while the deck is controlled by a personal computer. “REMOTE” appears in the display at this time.
Playing a Specific Track
While the deck is playing or stopped, use the procedure below to quickly play any track.
` / 1
Z
Number buttons
>10
– +
H H X
zx
./> . > +
mM
| – |
|
|
Locating a track |
|
|
|
To go to | Do the following: |
|
|
The next or a succeeding | Press > repeatedly. |
track during play |
|
|
|
A preceding track during | Press . repeatedly. |
play |
|
|
|
The beginning of the current | Press . once. |
track during play |
|
|
|
A specific track while the | Press ./> repeatedly until |
deck is stopped | the track number you want to go |
| to appears in the display, then |
| press H (or NX on the deck). |
|
|
zTo locate the last track of the MD quickly
While the deck is stopped, press . once.
zIf you locate a track while the deck is stopped or paused
The deck will still be stopped or paused at the beginning of the located track.
MDs Playing