Setup Menu Table
The following table provides an overview of the various Setup Menu items, including their parameters, factory settings, and reference page(s) in the manual.
To access the Setup Menu
While the deck is stopped, press MENU/NO twice to display “Setup Menu.”
Menu item | Function | Parameters | Factory setting | Reference page(s) |
Program ? | Creates a program. | — | — | 26 |
|
|
|
|
|
T.Mark | Turns Automatic Track Marking on or off. | Off/LSync | LSync | 18 |
|
|
|
|
|
LS(T) | Changes the trigger level for Automatic Track Marking. | 18 | ||
|
|
|
|
|
Auto | Turns Auto Space and Auto Pause on or off. | Off/Space/Pause | Off | 28 |
|
|
|
|
|
S.Space | Turns Smart Space and Auto Cut on or off. | On/Off | On | 17 |
|
|
|
|
|
P.Hold | Continuously displays the level of the strongest signal. | On/Off | On | 16 |
|
|
|
|
|
Sleep | Turns the Sleep Timer function on or off. | On/Off | Off | 39 |
|
|
|
|
|
Rec | Selects the recording mode. | Stereo/Mono | Stereo | 14 |
|
|
|
|
|
*Adjustable in 2 dB steps.
To recall a factory setting
Press CLEAR while selecting the parameter.
Self-Diagnosis Function
The deck’s
Cause/Remedy | |
C11/Protected | The inserted MD is |
| , Take out the MD and close the |
|
|
C13/REC Error | The recording was not made properly. |
| , Set the deck in a stable surface, and repeat the recording procedure. |
|
|
| The inserted MD is dirty (with smudges, fingerprints, etc.), scratched, or substandard in quality. |
| , Replace the disc and repeat the recording procedure. |
|
|
C13/Read Error | The deck could not read the TOC on the MD properly. |
| , Take out the MD and insert it again. |
|
|
C14/TOC Error | The deck could not read the TOC on the MD properly. |
| , Insert another disc. |
| , If possible, erase all the tracks on the MD (page 31). |
|
|
C71/Din Unlock | The sporadic appearance of this message is caused by the digital signal being recorded. This will not affect |
| the recording. |
|
|
While recording from a digital component connected through the DIGITAL (OPTICAL) IN1/2 connector, the digital connecting cable was unplugged or the digital component turned off.
,Connect the cable or turn the digital component back on.
Information Additional