4Repeat steps 2 and 3 to enter the rest of the name.
To change a character
Press m/M repeatedly until the character to be changed flashes, press CLEAR to erase the character, then repeat steps 2 and 3.
To erase a character
Press m/M repeatedly until the character to be erased flashes, then press CLEAR.
To enter a space
Press M while the cursor is flashing.
5Press NAME.
The whole name appears in the display.
To cancel the operation
Press MENU/NO or x.
zYou can use Edit Menu to name a track or the MD
1While the deck is stopped, playing, or paused, press MENU/ NO to display “Edit Menu.”
2Press ./> repeatedly until “Name ?” appears, and then press YES.
While the deck is recording, a flashing cursor appears in the display and you can enter a name for the track currently being recorded. In this case, go to step 6.
3Press ./> repeatedly until “Nm In ?” appears, and then press YES.
4Press ./> repeatedly until the number of the track (when naming a track) or “Disc” (when naming the MD) flashes, then press YES.
5Press YES again to flash cursor.
6Repeat steps 2 to 5 (page 34 and this page) of “Naming a track or MD.”
The whole name appears in the display.
zYou can undo the naming of a track or MD
For details, see “Undoing the Last Edit” on page 37.
You can copy an existing track or disc name and use it to name another track on the same disc or the disc itself.
1While the deck is stopped, playing, or paused, press MENU/NO.
“Edit Menu” appears in the display.
2Press ./> repeatedly until “Name ?” appears, then press YES.
3Press ./> repeatedly until “Nm Copy ?” appears, then press YES.
4Press ./> repeatedly until the number of the track (when copying the track name) or “Disc” (when copying the disc name) flashes, then press YES to copy the selected name.
When “No Name” appears in the display
The selected track or disc has no name.
5Press ./> repeatedly until the number of the track (when naming a track) or “Disc” (when naming a disc) flashes, then press YES to enter the copied name.
“Complete!!” appears for a few seconds and the name is copied.
To cancel the operation
Press MENU/NO or x.
zWhen “Overwrite ??” appears in step 5 above
The track or the disc selected in step 5 already has a name. If you wish to replace the name, press YES again while the indication appears in the display.
zYou can undo the copying of a track or disc name
For details, see “Undoing the Last Edit” on page 37.
MDs Recorded Editing