Sony MDS-PC2 Connecting the AC power cord, Connecting a personal computer, Hooking Up the Audio Components, Connecting audio conponents to CONTROL A1 jacks

Started Getting

Hooking Up the Audio ComponentsConnecting audio conponents to CONTROL A1 jacks

Monaural (2P) mini-plug cords (not supplied)

For information on connections through the CONTROL A1 jacks, see page 39.

Connecting the AC power cord

Connect the AC power cord of the deck to a wall outlet.

Note

Do not connect the AC power cord to a switched outlet.

Connecting a personal computer

Connect the MD deck to a personal computer using a monaural mini-plug cord (2-pin) (supplied) and a connector (supplied).

By this connection, you can edit MDs on computer’s display or input disc names and track names using computer’s keyboard. For connection and operation, refer to the operating instructions supplied with the MD editor 2 software for details.

Notes on setting up

•Don’t place your personal computer on top of this MD deck.

•Don’t install the deck vertically (sideways).

6GB