Naming Tracks or MDs
You can enter a name for a recorded MD as well as for individual tracks. Names can consist of uppercase and lowercase letters, numbers, and symbols. A total number of 1,700 characters can be stored for all the names on the MD.
` / 1
Z
YES
MENU/NO 
CLEAR
NAME 
CHAR
Letter/number buttons
– +
HX
zx
. > + ./>
2Press CHAR repeatedly to select the character type.
To select | Press repeatedly until |
Uppercase letters | “Selected ABC” appears in the |
| display |
|
|
Lowercase letters | “Selected abc” appears in the |
| display |
|
|
Numbers or symbols* | “Selected 123” appears in the |
| display |
*The following symbols can be selected:
! ” # $ % & ’ ( ) * + ,
A
3 Enter a character. |
If you’ve selected uppercase or lowercase letters |
1 Press the corresponding letter/number button |
repeatedly until the character to be entered flashes. |
Editing
m/M m M
Note
–
Or, press the button once and press ./> |
repeatedly. |
D
MDs Recorded
If you name a track while it is being recorded, be sure to finish the naming operation before the track ends. If the track ends before you finish, the entered character data will be discarded and the track will remain unnamed. Also, you can’t name tracks while the deck is recording over existing material.
Naming a track or MD1Press NAME while the deck is in one of the operating statuses below, depending on what you want to name.
To name a track
Press while the deck is playing, paused, recording, or stopped with the track number displayed.
To name the MD
Press while the deck is stopped with no track number displayed.
A flashing cursor appears in the display.
To change a selected character
Repeat step 2.
2Press M.
The flashing character is entered and lights continuously and the cursor shifts to the right.
D 
If you’ve selected numbers
Press the corresponding number button.
The number is entered and the cursor shifts to the right.