Playing Tracks Repeatedly

You can play an entire MD repeatedly. This function can be used with Shuffle Play to repeat all the tracks in random order (page 26), or with Program Play to repeat all the tracks in the program (page 26). You can also repeat a specific track or portion within a track.

` / 1

Z

– +

HX

zx

.> +

m M

–

M

REPEAT

AyB

 

Note

If you turn off the deck or disconnect the power cord, the deck will store the last setting of the repeat play (“Repeat All” or “Repeat 1”) and recall it the next time you turn on the deck.

Repeating all the tracks on the MD(Repeat All Play)

Press REPEAT repeatedly until “Repeat All” appears in the display.

When you play an MD, the deck repeats the tracks as follows:

When the play mode is

The deck repeats

Normal play (page 22)

All the tracks in sequence

 

 

Shuffle Play (page 26)

All the tracks in random order

 

 

Program Play (page 26)

All the tracks in the program in

 

sequence

 

 

To stop Repeat All Play

Press x.

To resume normal play

Press REPEAT repeatedly until “Repeat Off” appears in the display.

Repeating the current track(Repeat 1 Play)

While the track you want to repeat is being played, press REPEAT repeatedly until “Repeat 1” appears in the display.

Repeat 1 Play starts.

To stop Repeat 1 Play

Press x.

To resume normal play

Press REPEAT repeatedly until “Repeat Off” appears in the display.

Repeating a specific portion within atrack (Repeat A-B Play)

You can specify one portion within a track to be played repeatedly. Note that the portion that you specify must be within the boundaries of a single track.

1While the deck is playing, press AyB at the starting point (point A) of the portion to be played repeatedly.

“REPEAT A-” lights up and “B” flashes in the display.

2Continue playing the track or press M to locate the ending point (point B), then press AyB.

“REPEAT A-B” lights up and Repeat A-B Play starts.

To stop Repeat A-B Play and resume normal play

Press REPEAT or x.

zYou can set a new starting point and ending point during Repeat A-B Play

You can change the current ending point to a new starting point, then specify a new ending point to repeat a portion right after the current portion.

1 During Repeat A-B Play, press AyB.

The current ending point changes to the new starting point (point A).

“REPEAT A-” lights up and “B” flashes in the display.

2 Locate the new ending point (point B) and press AyB. “REPEAT A-B” lights up and the deck starts to repeat the newly specified portion.

MDs Playing

25GB