[] For models with avoltage selector, set
VOLTAGE SELECTOR to the position
of your local power line voltage.
Brazil model only
VOLTAGESELECTOR
220V
Other models
VOLTAGE SELECTOR
_2rJV
23o
240V 220V
[] Connect the power cord to a wall
outlet.
The demonstration ,appears in the display.
When you press I/(_), the system turns on
and the demonstration automatically ends.
If the supplied adaptor on the plug does not
fit your wall outlet, detach it from the plug
(only lbr models equipped with an adaptor).
Notes
• Keep the speaker cords away flora the antennas to
p_event noise.
• Be sure to connect both left and right stH-rotlnd
speakas (Except for MHC-GN990/GN660)
• Be stue to match the color of the speaker terminals on
the system and the connectors.
• Be sure to connect the speakers securely and
conectly When connecting speaker cords, inse[t the
connectors straight into the temfinals
To connect optional components
See page 33.
Inserting two R6 (size AA)
batteries into the remote
Note
If you do not use the remote for a long period of time,
remove the battaies to avoid possible damage flora
battay leakage and conosion.
Tip
With normal use, the battaies should last tbr about six
months When the remote no longer operates the
system, replace both batteries with new ones
Attaching the speaker pads
Attach the supplied speaker pads to the bottom
of the speakers to stabilize the speakers and
prevent them from slipping.
When carrying this system
Do the following procedure to protect the disc
mechanism.
Use buttons on the system for the operation.
1 Press I/@ to turn on the system, then
press CD. Make sure that all discs are
removed from the system.
2Hold down CD, then press I/@ until
"LOCK" appears in the display.
3Release I/(D first, then release CD.
4Unplug the AC power cord.
10o8