To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock do not open the cabinet.
Refer se!"vicing to qualified personnel only.
To prevent fire, do not cover the ventilation of the
apparatus with newspapers, table-cloths, curtains, etc.
And don't place lighted candles on the apparatus.
To prevent fire or shock hazard, do not place objects
filled with liquids, such as vases, on the apparatus
I Do not install the appliance in a confined space,such as a bookcase or built-in cabinet.
_) This appliance is
I CLASS1LASERPRODUCT classified as a CLASS 1
i
LUOKAN LASERLAITE LASER product. This
KLASSI LASEfIAPPARAr label is located on the
reai exterior
_@ Don't d]row away the battei 7 with
general house waste, dispose of it
correctly as chemical waste.
NOTICE FOR THE CUSTOMERS IN THE
U.S.A.
Do_u_nE_OVEcoven E_>R_C_
This symbol is intended to ale[t
the user to the presence of
uninsulated "dangerous voltage"
within the product's enclosure
that may be of sufficient
magnitude to constitute a risk of
electric shock to persons
This symbol is intended to alert
the user to the presence of
important operating and
maintenance (saadcing)
insnuctions in the literanue
accompanying the appliance.
WARNING
This eqtfipment has been tested and/bund to colnply
with the limits for a Class B digital device, pursuant to
Pa[t 15 of the FCC Rules. These limits are designed to
provide reasonable protection against hannfifl
interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may canse harmfifl
interference to radio conmmnications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
ham_ful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to t_W to correct the
interference by one or more of the tbllowing measures:
Reorient or relocate the receiving ante_ma
Increase the separation between the equipment and
receiver
Connect the equipment into an outlet on a circuit
diffelent fiom that to which the receiver is
connected.
Consult the deale! or an experienced radioiTV
technician tbr help.
CAUTION
You are cantioned that any changes or modification not
expressly approved in this manual could void your
anthority to operate this equipment.
Note to CATV system installer:
This reminder is provided to call CATV system
installer's attention to Article 820-40 of the NEC that
provides guidelines for proper grotmding and, in
palticular, specifies that the cable ground shall be
connected to the grounding system of the building, as
close to the point of cable entry as practical
CAUTION
The use of optical instruments with this p_oduct will
increase eye hazard
ENERGY STAR ® is a U.S.
registered mark. As an ENERGY
STAR _ partner, Son}, Co_13oration
has detamined that this product
meets the ENERGY STAR ®
guidelines for enagy efficiency
2GB