8 Press ENTER.
The type of timer (PLAY TIMER),
followed by the start time, the stop time and
the music source appears, then the original
display appears.
9Press I/_ to turn off the system.
Other operations
To Do this
Check the setting 1 Press CLOCK,'TIMER
SELECT.
2Press I_t+ or
:epeatedly to select "PLAY
SELECT'?", then press
ENTER.
Change the setting Sta:t from step 1.
Cancel the timer 1 Press CLOCK/TIMER
SELECT.
2 Press I_t+ o:
:epeatedly to select "TINIER
OFF'?" fl:enp:ess ENTER.
Notes
• You cannot select the Play Timer and Timer
Recording at the same time
• If you use the Play Timer and the Sleep Timer at the
same time, the Sleep Timer has priority.
• The Play Tin:e: will not be activated if the system is
Oil.
Tip
The system U_rnson 15seconds befo:e filepreset time
You can record a preset radio station from a
specified time.
To make a timer recording, you must first preset
the radio station (see "Presetting radio stations"
on page 16) and set the clock (see "Setting the
clock" on page 11).
Use buttons on the remote for the operation.
1Tune in the preset radio station (see
"Listening to a preset station" on
page 18).
2Press CLOCK/TIMER SET,
"SET" appears in the display, ibllowed by
"PLAY SET?".
Press I_1+ or -I.ql_l repeatedly to
select "REC SET?", then press ENTER.
"ON" appears and the hour indication
flashes in the display.
4Set the time to start recording.
Press I1_t+ or _ repeatedly to set the
hour, then press ENTER.
The minute indication start flashing.
Press I1_1+ or _ repeatedly to set the
minute, then press ENTER.
5 Set the time to stop recording following
the same procedure as step 4.
The type of timer (RE('), followed by the
start time, the stop time and the preset radio
station to be recorded (e.g., "TE%:ER FM
5") appears, then the original display
appears.
Load a recordable tape into Deck B.
7Press TAPE repeatedly to select
"TAPE B".
2808