"PLAY SET?" and "REC SET?" do not appear
when you press the CLOCK/TIMER SET button
on the remote.
• Set tile time! correctly.
• Set tile clock
The remote does not function.
• Remove the obstacle between the _emote and the
system
• Move the remote closer to tile system
• Point the remote at the system's sensor.
• Replace the batteries (Rdisize AA)
• Locate the system away fiom the fluolescent light.
There is acoustic feedback.
• Decrease the volume.
• Move the microphone away from the speakers or
change the direction of the microphone.
The color irregularity on a TV screen persists.
• TtFn off the TV set once then ttml it on ariel 15
to 30 mimltes. If the color irregularly, still
pelsists, place the speakels farther away from the
TV set.
The sound from the component connected to
the VIDEO/MD (AUDIO) IN jacks is distorted.
• If"NID" appears in the display when you pless
VIDEOiMD, switch the display to "VIDEO"
fimction (see "Listening to audio from a
connected component" on page 34)
Speakers
Sound comes from one channel or
unbalanced left and right volume,
• Check the speake! connection and speaker
placement.
• The source being played back is monam-al.
Sound lacks bass.
• Check that the speakel's + and terminals me
connected conectly
CD/MP3
The disc tray does not open and "LOCKED"
appears in the display.
• Contact yore Sony deale! o! local authorized Sony
sm",'ice thcili_,.
The disc tray does not close.
• Load the disc conectly.
• Always close the tray by pressing j" OPEN/
CLOSE on the system. Tlying to push the tray
closed with your fingers may canse problems with
the system.
The disc does not eject.
• You cannot eject the disc dining CD Synchlo
Recording. Press • to cancel the CD Synchro
Recmding, then press _ OPEN/CLOSE on the
system to eject the disc.
• Consult yore nemest Sony dealer
Play does not start.
• Open the disc tray and check whethel a disc is
loaded.
Wipe the disc clean (page 40).
Reload the disc.
Load the disc that this system can play (page 5).
Load the disc correctly.
Load the disc in the tray with the label side up.
Remove the disc and wipe away the moistme on
the disc, then leave the system tm_ied on for a few
hems until the moislme evaporates
• Press "q_ (or _ on the remote) to sta*t
playback.
Disc access takes alonger time.
• Set "CD POWER ON" by CD power manage
fimction (page 17).
The sound skips.
• Wipe the disc clean (page 40).
• Reload the disc.
• Tly moving the system to a place without
vibration (e.g., on lop of a stable stand)
•Tly moving the speakers away fwm the system, or
placing them on separate stands. When you listen
to a track with bass sotmds at high vohnne, the
speaker vibration may canse the sound to skip
Playback does not start from the first track.
• Piess PLAY MODE repeatedly until both "PGM"
and "SHUF" disappear in the display to leturn to
Nomml Play.
e-
er
¢D
O
5'
re,
continued
3708