•Do not use any solvent (benzine, thinner, static protection product, record cleaner, etc.) to clean a disc.

Notes

•Do not remove the disc while reading or writing data.

•Data may be damaged if:

–You remove the disc or shake the camera while reading or writing data.

–You turn off your camera while reading or writing data.

–You use the camera in a location subject to the effects of static electricity or noise.

•Do not attach any material on the surface of a disc. This causes a nonuniform rotating speed, which may cause the camera to malfunction.

•You can write only on the label surface of a disc. Write using only an oil-based felt-tip marker and do not touch the ink until dry. Do not heat the disc or use a sharp-pointed tool, such as a ballpoint pen.

•Hold the disc at the edges while supporting the center hole lightly. Do not touch the recordable side (the reverse of the printed side) of a disc.

•When you carry or store a disc, put it in its case.

•Do not strike, bend, drop or rub the edge of a disc.

•Do not store a disc in the following locations:

–In dusty or dirty places

–Exposed to direct sunlight

–Near heaters

–In damp places

•If you attempt to play back a disc on which no images have been recorded using a disc drive, the disc drive may malfunction or the disc may be scratched.

On “InfoLITHIUM” battery pack

What is the “InfoLITHIUM” battery pack?

The “InfoLITHIUM” battery pack is a lithium-ion battery pack that has functions for communicating information related to operating conditions between your camera and the AC power adaptor.

The “InfoLITHIUM” battery pack calculates the power consumption according to the operating conditions of your camera, and displays the remaining battery time in minutes.

Charging the battery pack

•We recommend charging the battery pack

in an ambient temperature of between 10°C to 30°C (50° F to 86° F). You may

not be able to efficiently charge the battery pack outside of this temperature range.

•We recommend fully charging the battery pack (page 13).

120