Canceling finalization (Unfinalize)
To cancel the unfinalization
UNFINALIZE
PLACE ON LEVEL SURFACE
READY?
O K
CANCEL
OK
1
,Set the mode dial to .
“UNFINALIZE PLACE ON LEVEL SURFACE” appears on the LCD screen.
•When using a
•You can also carry out this operation when the
mode dial is set to S*, A*, M*, SCN or .
*
UNFINALIZE
AVOID ANY VIBRATION
UNFINALIZE IN PROGRESS
2
,Select [OK] with v/V on the control button, then press z.
Unfinalization starts and the disc remaining indicator changes from RW to RW . Unfinalization takes about one minute. Place the camera on a stable surface, and do not shake or strike the camera during unfinalization.
Select [CANCEL] with v/V on the control button, then press z. After canceling the unfinalization, you can continue and record images on the
To unfinalize again after canceling the unfinalization
Set the mode dial to SET UP, then select
[UNFINALIZE] under [DISC TOOL] in the SET UP settings (page 116).
•You cannot execute unfinalization when you record a new image or edit an image on a CD- RW after executing finalization.
46