Using the supplied 8 cm CD adaptor

1Printed side of

the disc

2

Printed side of the adaptor

1

 

2

3

,Slide the disc into the inner groove and under two of the tabs on the inner circle of the adaptor in the order shown by the numbers.

If your disc drive does not support 8 cm CD, use the supplied 8 cm CD adaptor.

•The supplied adaptor may not be compatible with your disc drive. For details, see the operating instructions for the disc drive.

•Use the adaptor at a low speed (8×-speed or less).

•The reverse side of the disc is the recordable surface.

•“SONY” is printed on the reverse side of the adaptor and the surface is lustrous.

,Pull the third tab to the outside and slip the disc into place. Release the third tab and the disc will be held firmly in place.

•Do not expose the adaptor to direct sunlight or heat sources.

•The adaptor can be used only with Mavica discs. It cannot be used with other 8 cm CD-R/ CD-RW.

,Check that the disc is set correctly in the grooves of the adaptor, all the tabs are even with the surface of the adaptor, and the disc does not protrude from the adaptor.

•If the tabs protrude, press them into place, as this may cause your disc drive to malfunction.

computer your to images Copying

47