Using an external power source
Using your camera abroad
DC IN jack cover
DC connecting cable
1 AC power adaptor (supplied)
,Open the DC IN jack cover and connect the DC connecting cable to the DC IN jack of your camera.
Connect the cable with the v mark facing up.
•Connect the AC power adaptor to an easily accessible wall outlet (wall socket) close by. If some trouble occurs while using the adaptor, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).
•Remove the battery pack when using an external power source.
2To wall outlet (wall socket)
Power cord (mains lead)
1
AC power adaptor
2 (supplied)
,Connect the power cord (mains lead) to the AC power adaptor and then to a wall outlet (wall socket).
•When you have finished using the AC power adaptor, disconnect it from the DC IN jack of the camera.
•To use power from an automobile, use the Sony DC adaptor/charger (not supplied).
•If you insert or remove the DC plug while you are using the battery, the power may shut off.
Power sources
You can use your camera in any country or area with the supplied battery charger within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet (wall socket) [b].
•Do not use an electronic transformer (travel converter), as this may cause a malfunction.
16