2 To wall outlet (wall socket)

Power cord (mains lead)

•If sufficient battery remaining time is indicated but the power runs out soon, fully charge the battery pack so that the correct battery remaining time appears.

Battery remaining indicator

The battery remaining indicator on the LCD shows the remaining shooting or viewing

1

AC power adaptor

4 (supplied)

To remove the battery pack

time.

60min

640

 

 

 

 

 

 

 

 

 

4

,Connect the power cord (mains lead) to the AC power adaptor and then to a wall outlet (wall socket).

The/CHG lamp (orange) lights up when charging begins, and goes off when charging is completed. After charging the battery pack, disconnect the AC power adaptor from the DC IN jack of your camera.

•We recommend charging the battery pack in an ambient temperature of between 10°C to 30°C (50°F to 86°F).

•Charging is complete in approximately 150 minutes. The charge lamp may remain lit longer than 150 minutes, but this is not a malfunction.

Battery eject lever

Open the battery cover. Slide the battery eject lever in the direction of the arrow, and remove the battery pack.

•Be careful not to drop the battery pack when removing it.

•When charging, the battery remaining indicator shows the time remaining in terms of performing continuous shooting (with all indicators on).

•The displayed time remaining may not be correct under certain circumstances or conditions.

Charging time

Approximate time to charge a completely discharged battery pack using the AC-L10A/ L10B AC power adaptor at a temperature of 25°C (77°F).

Battery pack

Full charge

 

(min.)

 

 

NP-FM50 (supplied) Approx. 150

14