On the remote control
DISPLAY
1 Press DISPLAY while playing.
Each time you press DISPLAY, the display changes as follows.
Display window on the remote control
CD
Indication C/D
Track number/Elapsed time
r
Track number/Track name1) r
The number of tracks in the disc/ Disc name1)
r
1)Appears only if the track has been labeled.
2)Appears only when the clock is set.
z
•If you want to check the remaining time or the recording position while recording or in stop mode, see page 29.
•The display that appears on the recorder is different from the ones on the remote control. See “On the recorder” (page 40) to check the display that appears on the recorder.
Connect the i/LINE OUT jack of the recorder to the LINE IN jacks of an amplifier or a tape player with a line cable. For more information on line cables, see “Optional accessories” (page 69). The output is analog. The recorder plays the MD digitally and sends analog signals to the connected equipment.
Portable DAT | Stereo system, | |
recorder | etc. |
|
to LINE IN |
| |
Stereo | 2 phono plugs | |
| R | L |
| (red) | (white) |
RK- |
| RK- |
G136 |
| G129 |
to i/LINE OUT
Jog lever (L)
When connecting a line cable to the i/ LINE OUT jack of the recorder, be sure to set the “AUDIO OUT” parameter for the i/LINE OUT jack.
1 Press the jog lever (L), flip the lever until “AUDIO OUT” flashes in the display, and then press the lever again.
2 Flip the jog lever (L) until “LINE OUT” flashes in the display, and then press the lever.
41