Sony MZ-R900 manual 62

Symptom	Cause/Solution
The recorder does	• A Premastered MD is inserted (“P/B ONLY” appears) when
not work or works	recording.
poorly.	,Insert a recordable MD
“NO SIGNAL”	• There is no digital signal from the portable CD player.
appears in the	,When recording digitally from a portable CD player, use the
display when	AC power adaptor and disable the anti-skip function (such as
recording from a	ESP) on the CD player (page 18).
portable CD
player.
There is no	• The AC power adaptor was unplugged or a power outage occurred
recording on the	during recording.
MD after a
recording
operation.
The lid does not	• The power sources have been disconnected during recording or
open.	editing, or the battery have been exhausted.
	,Set the power sources again, or replace the exhausted battery
	with new ones.
No sound comes	• The headphones/earphones plug is not firmly connected.
through the	,Plug in the plug of the headphones/earphones firmly to the
headphones/	remote control. Plug in the plug of the remote control firmly to
earphones.	i/LINE OUT.
	• Volume is too low.
	,Adjust the volume by pressing VOL +/–.
	• The plug is dirty.
	,Clean the plug.
	• Sound comes through the headphones/earphones has a lot of static.
	• The “AUDIO OUT” parameter for the i/LINE OUT jack is set to
	“LINE OUT”.
	,Set to “HeadPhone”.
Volume cannot be	• AVLS is on.
turned up.	,Set AVLS to “AVLS OFF” (page 55).
An MD is not	• Playback mode is changed.
played normally.	,Use the jog lever (L) on the recorder or press RPT/ENT on the
	remote control to change back to the normal play.
An MD is not	• Disc playing stopped before it came to the last track.
played from the	,Flip the jog lever (press the control towards .repeatedly on
first track.	the remote) or open and close the lid once to go back to the
	beginning of the disc, and restart playing after checking the
	track number in the display.
	• The disc information has been stored to the Personal Disc Memory.
	,Erase the disc information from the Personal Disc Memory.

62