Notes on batteries

Incorrect battery usage may lead to leakage of battery fluid or bursting battery. To prevent such accidents, observe the following precautions:

Install the + and – poles of the batteries correctly.

Do not try to recharge dry battery.

When the recorder is not to be used for a long time, be sure to remove the batteries.

If a battery leak should develop, carefully and thoroughly wipe away battery fluid from the battery compartment before inserting new ones.

Note on mechanical noise

The recorder gives off mechanical noise while operating, which is caused by the power-saving system of the recorder and it is not a problem.

To protect a recorded MD

To record-protect an MD, slide open the tab at the side of the MD. In this position, the MD cannot be recorded. To record again, slide the tab back so the tab is visible.

Tab

Back of the MD

Recorded material is

protected.

Recorded material is not protected.

Note on digital recording

This recorder uses the Serial Copy Management System, which allows only first- generation digital copies to be made from premastered software. You can only make copies from a home-recorded MD by using the analog (line out) connections.

Premastered software such as CDs or MDs.

Digital recording

Home-

No

Recordable

recorded

digital

MD

MD

recording

 

Microphone, record player, tuner, etc (with analog output jacks).

Analog recording

Home-recorded MD

Digital recording

Recordable

No

Recordable

MD

digital

MD

 

recording

 

59