3 Flip the jog lever (L) until

“ : Erase” flashes in the display, and then press the lever.

“AllErase?” and “PushENTER” appear alternately in the display. To cancel erasing, press x.

4 Press the jog lever (L) again.

“TOC Edit” flashes in the display, and all the tracks will be erased. When erasing is complete, “BLANKDISC” appears in the display.

Adding a track mark

You can add track marks so that the part after the new track mark is counted as a new track.

The track numbers will increase as follows.

1

2

3

4

 

Track marking

1 2 3 4 5

Track numbers increase

T MARK

1 While playing or pausing an MD, press T MARK on the recorder at the point you want to mark.

“MARK ON” appears in the display, and a track mark is added. The track number will increase by one.

To add track marks while recording (except while synchoro-recording)

Press T MARK on the recorder at the point you want to add a track mark. You can use Auto Time Stamp to add track marks automatically at specified intervals.

Erasing a track mark

When you record with analog (line) input, unnecessary track marks may be recorded where recording level is low. You can erase a track mark to combine the tracks before and after the track mark. The track numbers will change as follows.

1

2

3

4

 

Erase a track mark

1 2 3

Track numbers decrease

X

T MARK

Jog lever (R)

1 While playing the track with the track mark you want to erase, press Xto pause.

2 Find the track mark by flipping the jog lever (R) towards .slightly.

For example, to erase the third track mark, find the beginning of the third track. “00:00” appears in the display. “MARK” appears in the display for 2 seconds.

44