You can check the track name, disc name, etc. during playback.
On the recorder
Jog lever (L)
1 While the recorder is playing, press the jog lever (L), flip the lever until “DISPLAY” flashes in the display, and then press the lever again.
2 Flip the jog lever (L) until the information you want flashes in the display.
Each time you flip the lever, the display changes as follows.
LapTime (The elapsed time.)
r
1 Remain (The remaining time of the current track.)
r
AllRemain (The remaining time after the current location.)
r
RecDate (Recording date and time.)
3 Press the jog lever (L).
The display changes as follows.
Display window on the recorder
AB
A | B |
|
|
Track number | Elapsed time |
|
|
Track number1) | Remaining time of |
| the current track |
|
|
Number of tracks | Remaining time |
after the current | after the current |
track2) | location. |
Recorded date3) | Recorded time3) |
1)If the track is labeled, “ 
” appears in the display followed by the track name.
2)If the disc is labeled, “
” appears in the display followed by the disc name.
3)Appears only when the clock is set.
z
The display that appears on the remote control is different from the ones on the recorder. See “On the remote control” (page 41) to check the display that appears on the remote control.
40