Functions1) | Operations |
To display “:”, | Press T MARK. |
and “/” repeatedly at |
|
the input position in |
|
the letter input area. |
|
|
|
To cancel labeling in | Press CANCEL. |
the letter input area. |
|
|
|
1)Functions of the buttons and control may differ depending on where the cursor is in the letter input area or the character palette.
2)If phrases are stored in the name bank, the first phrase stored appears in the display (page 21).
7 Repeat step 6, and then enter all characters of the label name.
8 Press down the jog dial for 2 seconds or more.
The disc is labeled.
On the remote control
1 Insert a disc.
See step 1 of “On the recorder” to check the varieties of name you can label (page 19).
2 Press DISPLAY for 2 seconds or more.
3 Turn the control repeatedly until “EDIT” flashes in the display, and then press x to enter.
4 Turn the control repeatedly until the following item appears in the display, and then press x to enter.
When labeling a track:
“ : Name”
When labeling a group: “GP : Name”When labeling a disc:
“ : Name”
5 Turn the control repeatedly to select a letter and press x to enter.
The selected letter stops flashing and the cursor moves to the next input position.
Functions | Operation |
To switch between | Press X |
katakana, capital letters, |
|
small letters, numbers/ |
|
symbols and phrases1). |
|
To move the cursor to the | Pull and turn the |
left or right. | control (VOL |
Functions | Operation |
To change the letter to the | Turn the control |
one before/next one. | (./N>). |
|
|
To insert a blank space to | Press DISPLAY. |
type in a new letter. |
|
|
|
To cancel labeling. | Press DISPLAY for |
| 2 seconds or more. |
|
|
To delete a letter and | Press |
move back all following | PLAYMODE. |
letters to the left. |
|
|
|
1)If phrases are stored in the name bank, the first phrase stored appears in the display (page 21).
6 Repeat step 5 and enter all characters of the label name.
7 Keep pressing x for 2 seconds or longer.
The track or disc is labeled.
To cancel labelingPress CANCEL on the recorder.
Press DISPLAY for 2 seconds or more on the remote control.
Notes
•When the recording is stopped while labeling a track, a group, or a disc during recording, or when the playback moves on to the next track while labeling a track during playback, the input at that point is entered automatically.
•“LP:” has automatically been added at the beginning of the track names for tracks recorded in MDLP mode.
•You cannot label or relabel the premastered disc.
20