5 Turn the jog dial to adjust the sound level.

To move the cursor between “T” to “B”:

Press x or X.

To switch between “SOUND 1” to “SOUND 2”:

Press X repeatedly to move the cursor to the top row, and then turn the jog dial.

6 Press the jog dial to enter.

The sound settings are saved and the playback display appears again.

On the remote control

1 Press SOUND on the remote control repeatedly to select “SOUND 1” or “SOUND 2”.

2 During playback, press SOUND for 2 seconds or more.

The recorder changes to B-setting mode. Pressing the SOUND button for 2 seconds again changes the recorder back to T-setting mode.

3 Turn the control repeatedly to adjust the bass or treble.

To switch “B” and “T”:

Press SOUND for 2 seconds or more.

To switch “SOUND 1” and “SOUND 2”:

Press SOUND for a short time.

4 Press x to enter.

To cancel the Digital Sound Preset

•On the recorder

Select “SOUND OFF” in step 3.

•On the remote control

Press SOUND repeatedly until nothing appears in the display.

Notes

•Digital Sound Preset becomes inoperative when the “AUDIO OUT” parameter for the i/LINE OUT jack is set to “LINE OUT”. In this case, set the “AUDIO OUT” to “HeadPhone” (page 7).

•When you use the Digital Sound Preset, the sound may break or become distorted depending on the settings or the track. In this case, change the settings of the sound quality.

•Changing to another Digital Sound Preset during a recording operation will not affect the quality of recorded sound.

To change playback speed (Speed Control)

See the illustrations in English text (pages 42 and 44).

The playback speed can be adjusted in 7 steps (80%, 85%, ...100%, 105%, 110%).

Setting can be stored to the Personal Disc Memory.

1 Press DISPLAY for 2 seconds or more during playback.

2 Turn the control repeatedly until “SPEED” flashes in the display, and then press x to enter.

The recorder changes to speed-setting mode.

3 Turn the control repeatedly to select the playback speed.

“+” shows the normal speed and the cursor shows the playback speed you are selecting.

4 Press x to set the playback speed. “S” appears in the display when the speed is changed.

Notes

•The playback sound will be affected by the playback speed.

•All settings will be lost when you remove the disc from the recorder (except when the settings of the disc has been stored to the Personal Disc Memory).

17