5 Turn the control repeatedly until the number or name of the desired first track flashes in the display, and then press x to enter.
6 Turn the control repeatedly until the number or name of the desired last track flashes in the display, and then press x to enter.
7 Follow steps 5 to 7 of “On the remote control” (page 20) in “Labeling recordings” to label a group.
Notes
•In step 5, the first track must be either the first track of an existing group or a track that does not belong to a group.
•When selecting the last track in step 4, make sure the track comes after the one selected in step 5. The last track must be either the last track of an existing group or a track that does not belong to a group.
To release a group setting
See the illustrations in English text (page 55).
On the recorder |
| |
1 | Press GROUP for 2 seconds or more to | |
2 | turn the group mode on. |
|
Play a group that you want to release | ||
| and check the contents (“Selecting and | |
| playing groups (Group Skip Mode)” | |
3 | (page 14)). |
|
Press x. |
| |
4 | Press the jog dial. |
|
5 | Turn the jog dial until “EDIT” flashes in | |
6 | the display, and then press to enter. | |
Turn the jog dial until “ | : Release” | |
| flashes in the display, and press to enter. | |
| “Release?” and “PushENTER” appear | |
7 | in the display. |
|
Press the jog dial to enter. |
|
The group setting of the selected group is released.
On the remote control
1 Follow the procedure of “To activate the group mode” (page 10) to turn the group mode on.
2 Play a group that you want to release and check the contents (see “Selecting and playing groups (Group Skip Mode)” (page 14)).
3 Press x.
4 Press DISPLAY for 2 seconds or more.
5 Turn the control repeatedly until “EDIT” flashes in the display, and then press x to enter.
6 Turn the control repeatedly until “GPRelease” flashes in the display, and then press x to enter.
7 Press x to enter.
25