Erasing phrases
On the recorder
1 While the recorder is stopped, press the jog dial.
2 Turn the dial until “EDIT” appears, and then press to enter.
3 Turn the jog dial until “BankErase” appears, and then press to enter.
4 Turn the jog dial until the phrase you want to erase flashes in the display, and then press to enter.
“Erase!” appears and the phrase is erased.
On the remote control
1
2 Turn the control repeatedly until “EDIT” flashes in the display, and press
xto enter.
3 Turn the control repeatedly until “BankErase” appears in the display, and then press x to enter.
4 Turn the control repeatedly until the phrase you want to erase appears, and then press x to enter.
To cancel the operation Press CANCEL on the recorder.
Press DISPLAY for 2 seconds or more on the remote control.
Registering tracks or groups as a new group (Group Setting)
See the illustrations in English text (page 54).
Do the following procedure to register tracks or groups as a new group. The tracks or groups must, however, be sequential. If the desired tracks or groups are not consecutive, you must move them to make them consecutive before you can register them (“Moving recorded tracks”, page 25). The operation of this function depends on whether group mode is on or off.
•When group mode is ON:
Several groups are registered as one group. A track without group setting can be registered to an existing group.
•When group mode is OFF:
Several tracks are registered as one group.
The following section explains the operation when group mode is on.
On the recorder
1 Press GROUP for 2 seconds or more to turn the group mode on.
2 While the recorder is stopped, press the jog dial.
3 Turn the jog dial until “EDIT” flashes in the display, and then press to enter.
4 Turn the jog dial until “
: Set” flashes in the display, and then press to enter.
5 Turn the jog dial until the number or name of the desired first track flashes in the display, and then press to enter. This selects the first track of the new group.
Even when the group mode is on, track numbers appear according to their order on the disc, not their order within the group.
6 Turn the jog dial until the number or name of the desired last track flashes in the display, and then press to enter. This selects the last track of the new group.
7 Follow steps 4 to 8 of “Labeling recordings” (page 19) to label a group.
On the remote control
1 Follow the procedure of “To activate the group mode” (page 10) to turn the group mode on.
2 While the recorder is stopped, press DISPLAY for 2 seconds or more.
3 Turn the control repeatedly until “EDIT” flashes in the display, and then press x to enter.
4 Turn the control repeatedly until “GP:Set” flashes in the display, and then press x to enter.
24