REC ERR :

The recording is not correctly done. Place the recorder at no vibration and record again.

The disc is dirty (with oil stainer finger prints), scratched, or out of standard. Record again with another disc.

READ ERR :

The recorder cannot read the disc information correctly. Reinsert the disc.

SORRY :

You tired to set Digital Sound Preset while the “AUDIO OUT” parameter is set to “LINE OUT”. Use the jog dial to set the “AUDIO OUT” parameter to “HeadPhone”.

You tried to erase a track mark while playing the MD or at the beginning of the first track.

You tried to erase a track mark to combine tracks the recorder cannot combine (a track recorded in different recording mode such as in LP2 and LP4, or a track recorded through analog connection and digital connection)*.

You tried to overwrite a track mark. You tried to press X, T MARK or REC MODE while synchro-recording or the joint text function is active.

￿If you have recorded or erased many times on the same MD, the data of a single track may be scattered throughout the MD.

When the data is scattered in groups of less than 12 seconds long, the recorder will not be able to combine the tracks.

TEMP OVER :

Heat has built up in the recorder. Wait until the recorder cools down.

TOC Edit :

The MD recorder is recording information (track start and end position) from the memory to the disc. Wait until this process is completed. Do not expose the recorder to physical shock, nor disrupt power supply.

TOC ERR :

The recorder cannot read the disc information correctly. Insert another disc. If it is no problem to erase all the contents of the disc, erase all (page 113).

TR FULL:

You tried to record more than 254 tracks.

TrPROTECT :

You tried to record over or edit a track which has been protected from being recorded over*.

￿Track-protected MiniDiscs — Some MD recorders will let you protect individual tracks from being recorded over. This recorder, however, does not offer this feature.

33