Sony MZ-R910 Erasing tracks, To Erase a track, To erase the whole disc, To erase a group, On the recorder, On the remote control, To erase a part of a track

While playing the track you want to erase, press the jog dial.

Erasing tracks

See the illustration in English text (page 60).

You can quickly erase recorded tracks, all the tracks and data of the MD, or groups.

Note that once a recording has been erased, you cannot retrieve it. Make sure of the contents you are erasing.

To Erase a track

On the recorder

2 Turn the jog dial repeatedly until “EDIT” flashes in the display, and then press to enter.

3 Turn the jog dial until “ : Erase” flashes in the display, and then press to enter.

“Erase OK?” and “PushENTER” appear in the display.

4 Press the jog dial to enter.

The track is erased and the next track starts to play. All the tracks after the one erased are automatically renumbered.

On the remote control

1 While playing the track you want to erase, press DISPLAY for 2 seconds or more.

2 Turn the control repeatedly until “EDIT” flashes in the display, and then press x to enter.

3 Turn the control repeatedly until “

:Erase” flashes in the display, and then press x to enter.

4 Press x to enter.

To erase a part of a track

Add track marks at the beginning and the end of the part you want to erase, then erase the part.

To erase the whole disc

1 While the recorder is stopped, press the jog dial.

2 Turn the jog dial until “EDIT” flashes in the display, and then press to enter.

3 Turn the jog dial until “ : Erase” flashes in the display, and then press to enter.

“AllErase?” and “PushENTER” appear in the display.

4 Press the jog dial to enter.

“TOC Edit” flashes in the display, and all the tracks will be erased.

When erasing is complete, “BLANKDISC” flashes and “00:00” appears in the display.

To erase a group

1 Press GROUP for 2 seconds or more to turn the group mode on.

2 Follow steps 1 and 2 of the procedure described under “On the recorder” in “Selecting and playing desired groups (Group Skip Mode)” (page 97) to check the contents.

3 Press x to stop playback.

4 Press the jog dial, turn the dial until “EDIT” flashes in the display, and then press the dial again.

5 Turn the jog dial until “ : Erase” flashes in the display, and then press the jog dial.

The group name, “GP Erase?” and “PushENTER” appear in the display.

6 Press the jog dial again. The group is erased.

To cancel erasing

Press CANCEL on the recorder.

Press DISPLAY for 2 seconds or more on the remote control.